(According to Machinery Directive 2006/42/EC, Annex II 1.B)

1. Manufacturer

• Company name: Smooth Robotics ApS
• Address: Hollufgaardsvej 31, 5260 Odense S
• Country: Denmark

2. Authorized Representative to Compile the Technical File

Nicolai Anton Lynnerup, Sr. Robotics Engineer, R&D, Smooth Robotics ApS, Hollufgaardsvej 31, 5260 Odense S, Denmark

3. Product Identification

• Product and Function: SmoothTool X, a part hardware and software add-on for automated robotic welding within Universal Robots Polyscope X environment.
• Model: INSERT VERSION
• Serial number: INSERT S/N

4. Statement

We hereby declare that the above-mentioned product, for what is supplied, constitutes partly completed machinery in the sense of the Machinery Directive 2006/42/EC.

The product is not intended to be placed into service on its own, and must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Machinery Directive.

1. Machinery Directive 2006/42/EC: The following essential requirements have been fulfilled: 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.1.7, 1.2.1, 1.2.3, 1.2.4.3, 1.2.4.4, 1.2.5, 1.3.2, 1.3.4, 1.3.6, 1.3.9, 1.4.1, 1.5.2, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.7.1, 1.7.2, 1.7.4, 4.1.2.1, Annex VI.
2. Low Voltage Directive 2014/35/EU: Reference the LVD and the harmonised standards below.

5. Technical Documentation

The relevant technical documentation has been compiled in accordance with Annex VII, Part B.

We undertake to transmit, in response to a reasoned request by national authorities, relevant information on the partly completed machinery.

6. Harmonised Standards Referred To

The following harmonised standards have been referred to:

• EN ISO 10218-1:2011 (1)
• EN ISO 12100:2010 (1)
• EN ISO 13732-1:2008 (1)
• EN ISO 13849-1:2023 (1)
• EN ISO 13849-2:2014 (1)
• EN ISO 13850:2015 (1)
• EN IEC 60204-1:2018 as applicable (2)
• EN 60947-5-5:1997/A2:2017 (2)

The following technical standards have been referred to:

• ISO/TS 15066:2016 (1)

7. Additional Information

The product must be integrated in accordance with the integration instructions provided by Smooth Robotics.

The system integrator is responsible for:

• Performing a full risk assessment
• Ensuring compliance of the final system
• Issuing the EU Declaration of Conformity
• Affixing the CE marking

8. Signature

Place: Odense, Denmark
Date: 2026-06-05

Name: Mark Kromann
Position: COO

Signature: _________________________